T-Bright Dental Zirconia Sintering Furnace

BrotherFurnace_J

5 years ago

T-Bright Dental Zirconia Sintering Furnace

T-Bright Dental sintering furnace, the electric lifting platform is used to accurately and quickly place the crucible in the furnace. 4 pcs MoSi2 is heated in a ring shape and the material is heated more evenly. Especially for zirconia dentures, the dentures that fired are more transparent and beautiful.

Dental Zirconia Sintering Furnace Features:

T-Bright is specially designed for the sintering of small batch samples of zirconia denture crystal, structural ceramics, and polymer ceramics.
Max temperature: 1700℃
Working temperature: 1600℃
Automatic program for heating, platform moving. It’s very convenient for dental crown firing.
The rated power is only 2kW, which is suitable for any small lab.
High speed temperature increasing, 0-40℃/min.
7 inch HD touch screen, easy to operate, can store 30 different processes, programs.
5pcs Mosi2 is heated in a ring shape, higher furnace temperature uniformity.
1 year warranty

Zirconia Sintering Furnace Technical Parameters

chamber size	Dia100xH110mm
Max. temperature	1700 ℃ (<2hour)
Working temperature	800-1600℃
Temperature controlling	● PID automatic control via SCR (Silicon Controlled Rectifier) power control with phase angle fired, current limiting resistor. ● Touch screen panel which can store 30pcs different programs ● Built in PID Auto-Tune function with overheating & broken thermocouple broken protection. ● Over temperature protection and alarm allows for operation without attendant.
Temperature accuracy	± 1℃
Temperature Uniformity	± 5℃
Heating rate	0-40℃ /min
Thermocouple	B type (Pt-Rh to Pt-Rh) with 99.7% purity Alumina tube
Heating element	U type MoSi2 heating elements
Zirconia Sintering Furnace Chamber	Zirconia Sintering Furnace Three layers of ceramic fiber insulation materials ● First layer: 1800℃ ceramic fiber board ● Second layer: 1600℃ ceramic fiber board ● Third layer: 1260℃ ceramic fiber board
Furnace structure	Double layer steel casing with dual cooling fan, surface temperature below 60℃
Furnace door	● Elevator opening with platform ● Power cutting off when furnace door open
Outer dimension	About 550X420X810mm
Working voltage	220V, 50HZ/60HZ, 1 phases (As per your order)
Rated power	2KW
Weight	Net Weight: about 90kgs Gross Weight: about 110kgs
Warranty	● One year limited warranty with lifetime support. (Consumable parts such as heating elements and crucibles are not covered by the warranty, please order the replacement at related products) ● ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty.
Certifications	CE

Application Notes
Using Attentions	● Cooling rate of this dental zirconia sintering furnace shall also not exceed 10 °C /min. ● Toxic or explosive gases are not recommended for use with this furnace without necessary safetycontrols and supervision. ● Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating. ● Refractory door block must be inserted before closing door.
Optional Spares
1800 type MoSi2 heating elements
B type thermocouple
Sinterinng trays
Zirconia beads