CE Standard Electric Muffle Furnace 1400℃ Max.
BR-14S high temperature muffle furnace 1400 type consists of high-quality alumina fiber brick and SiC heating elements with a special design. This lab furnace can be used up to 1400℃. It is an ideal electric furnace for materials annealing and sintering in your research laboratory.
Muffle Furnace 1400 type Features
- Operation Temperature: 1300℃ (1400℃ for short time).
- Maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient alumina fiber ceramic insulation.
- Heavy duty double layer structure with cooling fan. Lower temperature in outside case.
- PID automatic control via current limiting phase angle fired the resistor, e.g. SCR (Silicon Controlled Rectifier).
- Power control with 51 segments programmable.
Muffle Furnace 1400 type SPECIFICATIONS
Ⅰ. Technical Specifications |
|
| Max. temperature | 1400℃ (<2hour) |
| Working temperature | 1300℃ |
| Standard Temperature controlling | ● PID automatic control via SCR (Silicon Controlled Rectifier) power control with phase angle fired, current limiting resistor. ● 51 programmable segments for precise control of heating rate, cooling rate and dwell time. ● Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1400 type. ● Over temperature protection and alarm allows for operation without attendant.  |
| Optional of Temperature controlling | ● Software (Furnace can be operated by PC by installing a control software)
● Touch screen temperature controller |
| Temperature accuracy | ±1℃ |
| Temperature Uniformity | ±5℃ over 120mm @ 1400℃
±3℃ over 80mm @ 1300℃ |
| Heating rate | 0-15℃ /min |
| Thermocouple | S type (Pt-Rh to Pt-Rh) with 99.7% purity Alumina tube |
| Heating element | SIC heating elements |
| Furnace Chamber | Three layers of ceramic fiber insulation materials ● First layer: 1700℃ ceramic fiber board. ● Second layer: 1430℃ ceramic fiber board. ● Third layer: 1260℃ ceramic fiber board. |
| Furnace structure | Double layer steel casing with dual cooling fan, surface temperature below 60℃ |
| Furnace door | ● Power cutting off when furnace door open |
| Warranty | ● One year limited warranty for this Muffle Furnace 1400 type with lifetime support. (Consumable parts such as heating elements and crucibles are not covered by the warranty, please order the replacement at related products)
● ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty. |
| Certifications | CE |
Ⅱ. Application Notes |
|
| Using Attentions | ● The cooling rate of this Muffle Furnace 1400 type shall also not exceed 10℃ /min. ● Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision. ● Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating. ● Refractory door block must be inserted before closing door. |
Muffle Furnace 1400 ℃ Standard Size:
| Type | Max. Temperature(℃) |
Furnace Chamber Size(mm)
(Width x Height x Depth) |
Volume(L) | Rated Power(kw) |
| BR-14S-1 | 1400 | 100x100x100 | 1 | 1 |
| BR-14S-2 | 1400 | 120x120x130 | 2 | 2 |
| BR-14S-3 | 1400 | 150x150x150 | 3 | 3 |
| BR-14S-5 | 1400 | 150x150x200 | 5 | 4 |
| BR-14S-8 | 1400 | 200x200x200 | 8 | 6 |
| BR-14S-12 | 1400 | 200x200x300 | 12 | 7 |
| BR-14S-27 | 1400 | 300x300x300 | 27 | 9 |
| BR-14S-36 | 1400 | 300x300x400 | 36 | 10 |
| BR-14S-64 | 1400 | 400x400x400 | 64 | 18 |
| BR-14S-125 | 1400 | 500x500x500 | 125 | 30 |
| BR-14S-216 | 1400 | 600x600x600 | 216 | 42 |
| BR-14S-512 | 1400 | 800x800x800 | 512 | 76 |
| BR-14S-729 | 1400 | 900x900x900 | 729 | 95 |
| BR-14S-1000 | 1400 | 1000x1000x1000 | 1000 | 120 |
| Note: | Special size for Muffle Furnace 1400 type is customizable. | |||
See our other Muffle Furnace:
- 1200℃ Muffle Furnace
- 1700℃ Muffle Furnace
- 1800℃ Muffle Furnace
Follow us on Facebook
