Rotary Tube Furnace

1200℃ Rotating Tube Furnace, 3-7 RPM

BR-12RTF High Temperature Rotary Tube Furnace, 1200℃ Rotating Tube Furnace, 3-7 RPM is designed for calcining inorganic compound with better uniformity, especially excellent for preparing Li-Ion battery cathode materials with a conductive coating, such as LiFePO3, LiMnNiO3, etc in R&D Laboratory.

  • Max temperature 1200 ℃
  • 50 segments programmable and PID auto control
  • Heating rate: 0~20 ℃/min
  • Temperature accuracy: ±1 ℃
  • Upper open furnace cover design for real-time observation of heated materials
  • Furnace tilt angle 0 – 30℃ variable, it’s convenient for loading and unloading material
  • Tube rotating Speed 3 – 7 RPM variable ( reversible), and there are 3 quartz lifting plates on the inner wall of the tube. When rotating, the material is fully turned over and evenly heated.
  • It has safe operation functions such as opening and closing power, over temperature alarm and leakage protection

 

Ⅰ. Technical Specifications
Max. temperature1200℃ (<2 hours)
Working temperature700-1100℃
Standard Temperature controlling●  PID automatic control via SCR (Silicon Controlled Rectifier) power control with phase angle fired, current limiting resistor.
●  51 programmable segments for precise control of heating rate, cooling rate and dwell time.
●  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection.
●  Over temperature protection and alarm allows for operation without attendant.
20160914143548.png
Optional of Temperature controlling●  Software (Furnace can be operated by PC by installing a control software )
●  Touch screen temperature controller
Temperature accuracy±1 ℃
Heating rate<20 ℃/min
Tube rotating speed0-7 RPM vailable
Furnace tilt angle0-30°variable
ThermocoupleK type (Pt-Rh) with 99.7% purity Alumina tube
Heating elementFe-Mo-Cr sprial wire
Furnace ChamberTwo layers of ceramic fiber insulation materials
●  First layer: 1430℃ ceramic fiber board
●  Second layer: 1260℃ ceramic fiber board
Furnace structureDouble layer steel casing with dual cooling fan, surface temperature below 60 ℃.
Vacuum system●  Double stage rotary vane vacuum pump with magnetic valve to prevent the oil absorbed to tube.
●  Self-expansion type double silicon ring flange, 304 stainless steel HCP.
●  Needle valve + Mechanical vacuum gauge + Discharge valve
Warranty●  One year limited warranty with lifetime support. (Consumable parts such as heating elements and crucibles are not covered by the warranty, please order the replacement at related products)
●  ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty.
CertificationsCE
Ⅱ. Application Notes 
Using Attentions●  Cooling rate shall also not exceed 5℃ /min.
●  Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision.
●  Small cracks may appear on the surface of the refractory ceramics over extended use.
●  The tube furnace is avoid use vacuum above 1500, otherwise the tube will be serious deformation.

 

ModelTube size

(Thin end dia meter*Heating zone length)

Thick end diameterPowerMax working temperatureThermo
couple
Tube materialHeating element
BR-12NRT-60/30060x300mm120mm3 KW1100oCK typeQuartz tubeFe-Cr-Al-Mo wire
BR-12NRT-60/45060x450mm5 KW
BR-12NRT-80/30080x300mm150mm3 KW
BR-12NRT-80/45080x450mm5 KW
BR-12NRT-100/300100x300mm180mm5 KW
BR-12NRT-100/450100x450mm7 KW
BR-12NRT-150/300150x300mm200mm7KW
BR-12NRT-150/450150x450mm9 KW