T-Bright Dental Zirconia Sintering Furnace

T-Bright Dental Zirconia Sintering Furnace

T-Bright Dental sintering furnace, the electric lifting platform is used to accurately and quickly place the crucible in the furnace. 4 pcs MoSi2 is heated in a ring shape and the material is heated more evenly. Especially for zirconia dentures, the dentures that fired are more transparent and beautiful.

Dental Zirconia Sintering Furnace Featurers:

  • T-Bright is specially designed for the sintering of small batch samples of zirconia denture crystal, structural ceramics, and polymer ceramics.
  • Max temperature: 1700℃
    Working temperature: 1600℃
  • Automatic program for heating, platform moving. It’s very convenient for dental crown firing.
  • The rated power is only 2kW, which is suitable for any small lab.
  • High speed temperature increasing, 0-40℃/min.
  • 7 inch HD touch screen, easy to operate, can store 30 different processes, programs.
  • 5pcs Mosi2 is heated in a ring shape, higher furnace temperature uniformity.
  • 1 year warranty

dental zirconia sintering furnace t-bright

dentures

dental furnaces

 

Zirconia Sintering Furnace Technical Parameters

chamber size Dia100xH100mm
Max. temperature 1700 ℃ (<2hour)
Working temperature 800-1600℃
Temperature controlling ●  PID automatic control via SCR (Silicon Controlled Rectifier) power control with phase angle fired, current limiting resistor.
●  Touch screen panel which can store 30pcs different programs
●  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection.
●  Over temperature protection and alarm allows for operation without attendant.
Temperature accuracy ± 1℃
Temperature Uniformity ± 5℃
Heating rate 0-30℃ /min
Thermocouple B type (Pt-Rh to Pt-Rh) with 99.7% purity Alumina tube
Heating element U type MoSi2 heating elements
Zirconia Sintering Furnace Chamber Zirconia Sintering Furnace Three layers of ceramic fiber insulation materials
●  First layer: 1800℃ ceramic fiber board
●  Second layer: 1600℃ ceramic fiber board
●  Third layer: 1260℃ ceramic fiber board
Furnace structure Double layer steel casing with dual cooling fan, surface temperature below 60℃
Furnace door ●  Elevator opening with platform
●  Power cutting off when furnace door open
Outer dimension About 550X420X810mm
Working voltage 220V, 50HZ/60HZ, 1 phases (As per your order)
Rated power 2KW
Weight Net Weight: about 90kgs
Gross Weight: about 110kgs
Warranty ●  One year limited warranty with lifetime support. (Consumable parts such as heating elements and crucibles are not covered by the warranty, please order the replacement at related products)
●  ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty.
Certifications CE

Application Notes

Using Attentions ●  Cooling rate of this dental zirconia sintering furnace shall also not exceed 10 °C /min.
●  Toxic or explosive gases are not recommended for use with this furnace without necessary safetycontrols and supervision.
●  Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
●  Refractory door block must be inserted before closing door.

Optional Spares for T-Bright Zirconia sintering furnace

1800 type MoSi2 heating elements 1800 type MoSi2 heating elements
B type thermocouple B type thermocouple
Sinterinng trays Sinterinng trays
Zirconia beads Zirconia beads

 

See our other Dental Furnace:

 

Tips:

 

Follow us on Facebook

facebook twitter linkedin