Vacuum Tube Furnace

High Temperature Lab Vacuum Tube Furnace, 1200℃ 1400℃ 1600℃ Horizontal Tube Furnace

Brother vacuum tube furnace adopts high pure alumina or quartz tube, working temperature from 300℃ to 1600℃. Adopt an advanced temperature control system, high temperature accuracy, easy operation, excellent heat-insulation effect, symmetrical temperature uniformity. Mainly used for labs of the university, research center, and production enterprise, etc.

BR-12NT horizontal tube furnace adopts a 40, 60, 70, 80 or 100mm O.D quartz tube and a pair of stainless steel vacuum sealing flanges with needle valves & gauge allow heating samples under vacuum or gas flow conditions. The temperature of this tube furnace is controlled by a high precision digital controller which provides 51 programmable segments with +/- 1℃ accuracy. The max. working temperature is 1200℃.

BR-1400ST horizontal tube furnace max. working temperature is 1400℃.

BR-1600MT horizontal tube furnace max. working temperature is 1600℃.

Vacuum Tube Furnace features:

• Max temperature:
  1200℃ (HRE Fe-Cr-Al-Mo wire)
  1400℃ (SiC Heater)
  1600℃ (MoSi2 Heater)
• 50 segments programmable and auto control
• Furnace structure, double layer steel dual cooling fan, the surface temperature below 50℃
• 304 stainless steel sealing flange
• Adjustable flange support structure at both ends to extend furnace tube life
• Over-temperature protection function, automatic power-off when the temperature exceeds the allowable set value
• Safety protection Automatically power off when the furnace body leaks
• Heating rate ≦20℃/min
• Temperature accuracy ±1 ℃
• Max vacuum -0.1MPa (Standard type)
• Max vacuum 7×10^(-5)Pa (High vacuum type)

Now our vacuum tube furnace can reach Max vacuum 7×10^(-5)Pa.

Hydrogen tube furnace

Special design tube furnace

Standard Spares:

• Plugging tube 4 pcs
• Furnace tube 1 pc
• Vacuum pump 1 pc
• Vacuum sealing flange 2 sets
• Vacuum gauge 1 pc

Optional Spares:

• Vacuum system (Rotary vane vacuum pump, Diffusion pump, Molecular pump)
• Atmosphere system (Float flow meter, Mass flow meter)
• Quick release flange, Three-way flange
• 7 inch HD touch scree

Ⅰ. Technical Specifications
Max. temperature	1200℃, 1400℃, 1600 ℃ (<2 hours)
Working temperature	300-1500 ℃
Standard Temperature controlling	●  PID automatic control via SCR (Silicon Controlled Rectifier) power control with phase angle fired, current limiting resistor. ●  51 programmable segments for precise control of heating rate, cooling rate and dwell time. ●  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection. ●  Over temperature protection and alarm allows for operation without attendant.
Optional of Temperature controlling	●  Software (Furnace can be operated by PC by installing a control software ) ●  Touch screen temperature controller
Temperature accuracy	±1℃
Heating rate	Heating rate<15 ℃/min
Thermocouple	K, S, or B type (Pt-Rh) with 99.7% purity Alumina tube
Heating element	heating wires, SiC heating elements or MoSi2 heating elements
Max. vacuum	7×10^(-5) Pa
Furnace Chamber	There layers of ceramic fiber insulation materials ●  First layer: 1800℃ ceramic fiberboard. ●  Second layer: 1600℃ ceramic fiberboard. ●  Third layer: 1260℃ ceramic fiberboard.
Furnace structure	Double layer steel casing with dual cooling fan, surface temperature below 60 ℃.
Vacuum system	●  Double stage rotary vane vacuum pump with a magnetic valve to prevent the oil absorbed into tube. ●  Self-expansion type double silicon ring flange, 304 stainless steel HCP. ●  Needle valve + Mechanical vacuum gauge + Discharge valve
Warranty	●  One year limited warranty with lifetime support. (Consumable parts such as heating elements and crucibles are not covered by the warranty, please order the replacement at related products) ●  ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of a One Year Limited Warranty.
Certifications	CE
Ⅱ. Application Notes
Using Attentions	●  Cooling rate shall also not exceed 5 ℃ /min. ●  Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision. ●  Small cracks may appear on the surface of the refractory ceramics over extended use. ●  The tube furnace is avoid use vacuum above 1500℃, otherwise the tube will be serious deformation.

Vacuum tube furnace standard model

Vacuum tube furnace up to 1200℃

Vacuum tube furnace up to 1400℃

Vacuum tube furnace up to 1600℃

See our other type of tube furnace:

• Rotary Tube Furnace
• Vertical Tube Furnace
• Multi-Zone Tube Furnace
• CVD Furnace
• PECVD Furnace

Follow us on Facebook